Enhancing Your System - Sharp CD-BK310V Manual De Manejo

Enhancing Your System

The connection lead is not included. Purchase a commercially available lead as
shown below.
Red White
E-43 ENGLISH
! Listening to the playback sounds from
VCR, DVD, etc.
1
Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/
VCR, DVD, etc.
AUX sockets.
When using video equipment, connect the audio output to this unit and the video
output to a television.
2
Press the ON/STAND-BY button to turn the power on.
To the
line output
3
Press the VIDEO/AUX button.
sockets
4
Play the connected equipment.
White Red
Note:
To prevent hum interference, place this unit away from a television.
! To record on a tape
1
Insert a cassette in the TAPE 2 cassette compartment.
RCA lead
2
Press the VIDEO/AUX button.
(not supplied)
3
Press the REC PAUSE
4
Press the
5
Play the VCR, DVD, etc.
! Headphones
" Before plugging in or unplugging the headphones, reduce the volume.
" Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
" Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME control.
[ (TAPE)] button.
( /SELECT/RESUME) or button.
01/4/24 CD-BK310V(X)E5.fm