Resume Play; To Play Back The Video Cd Manually; Changing The Tv Screen Display - Sharp CD-M4000V Manual De Manejo

Resume Play

This function is to restart playback from the point where it has stopped.
During the stop mode, hold down the
ton for more than 1 second.
Playback will begin at the point where playback has stopped.
Notes:
z Resume play cannot be activated when the function is changed from CD/VIDEO
CD (CD) to another or the unit is set to the power stand-by mode.
z Resume play cannot be performed in the P .B.C. mode.
z Resume play cannot be performed whilst opening the disc tray or after changing
the disc.
To Play Back the Video CD
Manually
Usually this unit detects the video CD and plays back pictures and sounds. In case
this unit fails to judge it correctly, you can play back the video CD manually.
1
Press the VCD AUTO/VCD button until "VCD ON" appears on the
TV screen.
2
Press the /SELECT/RESUME button.
To return to the mode detecting the video CD automatically:
Press the VCD AUTO/VCD button until "VCD
AUTO" appears on the TV screen.
Notes:
z This setting will be cancelled when you change the discs.
z Whilst in the "VCD ON" state, you cannot play back audio CDs.
Changing the TV Screen Dis-
play
( /SELECT/RESUME) but-
You can check the operation of the main unit by the on-screen display.
Each time the OSD (OSD ON/OFF) button is pressed during playback
or in the stop mode, the display will change as follows:
[During stop mode]
<TV screen>
VCD ON
[During playback]
<TV screen>
Note:
VCD AUTO
The displays may differ depending on the discs.
00:00
No display
002/010 01:26
No display
Track Total Elapsed time
number number of
tracks
01/6/12 CD-M4000V(X)E3.fm
CD-M4000V
ENGLISH E-26