Sharp CD-BK137W Manual De Manejo página 17

Programmed play
You can choose up to 32 selections for playback in the order you like.
1
Whilst in the stop mode, press one of
the 1 - 3 buttons on the remote
control to select the desired disc.
2
Press the
select the desired track.
3
Press the MEMORY/SET (MEMORY)
button to save the track number.
When the track is memorised, "MEMORY" will appear.
4
Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be pro-
grammed.
If you make a mistake, the programmed tracks can be cleared by pressing the
CLEAR button.
5
Press the
To clear the programmed selections:
Press the CLEAR button on the remote control
whilst the "MEMORY" indicator is lit.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed. When all the tracks are cleared,
"MEMORY" will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be dis-
played. Then follow steps 1 - 3 to add tracks. The new tracks will be stored after the
last track of the original programme.
Notes:
Selected disc number
z Opening the disc tray automatically cancels the programmed sequence.
z Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD to another, the programmed selections will not be cleared.
z During programme operation, random play is not possible.
/ or / button to
Selected track number
Playback order
/ ( ) button to start playback.
ENGLISH
01/8/28 CD-BK137W(X)E2.fm
CD-BK137W
E-16