Listening To The Memorised Station - Sharp CD-BK300W Manual De Manejo

Listening to the Memorised Station

„ Memorising a station
You can store 40 AM and FM stations in memory and recall them at the push of a but-
ton. (Preset tuning)
1
Perform the steps 1 - 3 in "Listening to the Radio" on page 18.
2
Press the MEMORY/SET button to enter the preset tuning saving
mode.
3
Within 30 seconds, press the
button to select the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4
Within 30 seconds, press the MEMORY/SET button to store that
station in memory.
If the "MEMORY" and preset number indicators go out before the station is
memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset sta-
tion.
When a new station is stored in memory, the station previously memorised will
be erased.
Note:
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead disconnection.
E-19 ENGLISH
PRESET or PRESET
Listening to the Radio (See page 18.)
„ To recall a memorised station
Press the PRESET or
0.5 seconds to select the desired station.
Preset channel
This can be operated by pressing the
button on the remote control.
„ To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
1
Press the PRESET
than 0.5 seconds.
z The preset number will flash and the programmed stations will be tuned in se-
quentially, for 3 seconds each.
z This can be operated by pressing the
button on the remote control.
2
Press the PRESET or
the desired station is located.
„ To erase entire preset memory
1 Press the ON/STAND-BY button to enter the stand-by mode.
2 Press the ON/STAND-BY button whilst holding down the TUNER (BAND) button
and X-BASS/DEMO button until "TUNER CL" appears.
PRESET button for less than
Frequency and frequency band
PRESET / or PRESET
or PRESET button for more
PRESET / or PRESET
PRESET button again when
/
/