Spare Parts; Technical Data - Grizzly EHS 600-61 R Traducción Del Manual De Instrucciones Origina

center will be glad to provide you with
a cost estimate.
We can only process devices which
have been packaged sufficiently and
which have been dispatched with cor-
rect stamping.
• Note: In case of complaint or service,
please deliver your device cleaned,
and with an indication of the defect, to
our service address.
Devices sent in freight collect - by
bulk freight, express or with other
special freight - are not accepted.
• Defective units returned to us will be
disposed of for free.

Spare Parts

Replacement parts may be ordered di-
rectly from our Service Centre.
When ordering, always specify the ma-
chine type and the part number in the
exploded drawing.

Technical Data

Hedge Trimmer ............... EHS 600-61 R
Input voltage rating ..... 230-240 V~, 50 Hz
Input powe ...................................... 600 W
Safety class ........................................
Degree of protection .......................... IP20
Idling rotation speed .................. 1400 rpm
Weight ..........................................2,85 kg
Cutting length .............................. 550 mm
Cutting capacity ............................. 20 mm
Acoustic power level (L
guaranteed ..................................100 dB (A)
measured .......... 97,2 dB(A); K
Sound pressure level
(L ) .....................89,8 dB (A); K
pA
Vibration at the
handle (a ) ............. 2,95 m/s
h
bow handle (a ) ...... 1,99 m/s
h
II
)
wA
=2,77 dB
wA
=2,77 dB
pA
; K =1,5 m/s
2
n
; K =1,5 m/s
2
n
Noise and vibration values have been de-
termined according to the standards and
regulations named in the declaration of
conformity.
Technical and optical alterations may be
made without notice for the purposes of
improvement. No guarantee can be given
for the accuracy of dimensions, notices
and specifications stated in this manual.
The manufacturer shall therefore not ac-
cept liability for statutory claims arising
from the manual.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool
is turned off and times when the
tool is turned on but is running
idle).
2
2
UK
107