Sauder Edge Water 409048 Manual Del Usuario página 21

Step 16
Refer to the enlarged diagram to identify the parts on the HINGES and HINGE BRACKETS.
å
The DOORS may need some adjustments. Follow the text below to make needed adjustments.
å
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal), loosen the mounting screw several turns,
å
then turn the adjusting screw in or out. Tighten the mounting screw after making adjustments.
To adjust the DOORS up and down (vertical), loosen both screws that fasten the HINGE
å
BRACKETS to the END. Move the DOORS up or down to the desired location. Tighten the
screws after making adjustments.
To adjust the DOORS in or out (depth), loosen the mounting screw one turn and move the
å
DOORS in or out, as needed. Tighten the mounting screw after making adjustments.
Mounting screw (depth)
(vertical adjustment)
www.sauder.com/services
Adjusting screw (horizontal)
409048 Page 21