Harbor Breeze FREEPORT LP8079LAZ Manual Del Usuario página 13

FINAL ASSEMBLY INSTRUCTIONS
6. Remove the switch housing cover from the
switch housing assembly (G) by removing the
four preassembled screws. Retain the screws
for later.
7. Remove one of the three
screws inside the support bracket of the motor
assembly (A). Slightly loosen the remaining
two screws. Assemble the
assembly (G) to the support bracket of motor
assembly (A) using the two keyslots in the
switch housing assembly
third screw and secure all three screws.
8. Securely attach the connector from the motor
assembly (A) to the wire harness socket within
the switch housing assembly (G).
WARNING
The color label on these two connectors must
correspond to each other.
preassembled
switch housing
(G). Replace the
6
7
A
G
8
A
G
13
G
Lowes.com/harborbreeze