G40012 - TREVIDEA G3 Ferrari VISIR G40012 Manual Del Usuario

When using the product the first time, repeatedly use
steam (away from clothes) and try to use the iron on a
worthless piece of cloth to remove any manufacturing
residues that may stain or scratch the fabric.
When not in use, the iron must be stored upright.
Keep the power cord free from knots and tangles.
Do not wrap the power cord around the iron, either before
or after use.
It is recommended not to use too frequently the button
called "steam shock" (steam shot), because it decreases
the temperature of the iron plate which may cause drips of
water instead of steam.
Do not use the ironing system as a heating unit.
Always unplug the appliance before you fill or empty the
tank.
Do not fill the tank above the maximum capacity and do
not introduce into the tank mixtures for removing stain,
vinegar, descaling agents or chemicals in general.
Always select the most suitable temperature according to
the fabric to be ironed.
The iron must be used and rested on a stable surface.
When placing the iron on its iron stand, make sure that
the surface is stable. The iron should not be used if
dropped, when there are visible signs of damage, or if it
loses water during operations.
CAUTION: the iron plate gets very hot during use,
be careful not to touch it, serious risk of burns.
Do not put your face near the steam coming out the
iron plate.
MOD. G40012
(1) Water spray hole
(4) Steam shot button
(7) 360° rotating cable
(10) Self-clean button
(12) Refilling cup
(2) Water tank lid
(5) Water spray button
(8) Power cord
(11) Stainless steel iron plate with micro holes
(13) Water tank
(3) Steam regulator
(6) Iron plate control light
(9) Temperature control knob
(14) Power light
12