1. With the cuff wrapped around your wrist, press the
2. After all symbols disappear, the display will show "00".
Note:
The monitor will re-inflate automatically if the system
detects that your body requires more pressure for
measurement.
IB-WGNBPW-710--02.indd 17
START/STOP button. Do not inflate the cuff unless
it is wrapped around your wrist. All digits will light
up, checking the display functions. The checking
procedure will be completed after about 3 seconds.
The monitor is "Ready to Measure" and will
automatically inflate the cuff to begin measurement.
The cuff will then begin deflating as measurement
continues.
17
2012/7/6 上午 11:34