Manual Setup - Cisco Linksys X2000 Manual Del Usuario

Linksys X2000/X3000
L2TP
Layer 2 Tunneling Protocol (L2TP) is a service that generally applies to
connections in Israel .
Telstra Cable
Telstra Cable is a service that generally applies to connections in Australia .
Network Setup
The Network Setup section configures the IP settings for your local network .
Wireless > Basic Wireless Settings
NOTE
To learn more about any field, click Help on the right side of the
screen .
The basic settings for wireless networking are set on this screen .
There are two ways to configure the Router's wireless network(s), manual and
Wi-Fi Protected Setup .
Wi-Fi Protected Setup is a feature that makes it easy to set up your wireless
network . If you have client devices, such as wireless adapters, that support Wi-
Fi Protected Setup, then you can use Wi-Fi Protected Setup .
Configuration View
To manually configure your wireless networks, select
Manual .

Manual setup

Set up the wireless network on this screen .
NOTE
After you set up the wireless network(s), set up the wireless security
settings . Go to "Wireless > Wireless Security" on page 17 .
Network Mode
In most network configurations, you should leave it set to
Mixed (default) .
Wireless settings
Basic Wireless Settings (Manual) > Wireless Settings
Network Mode Select the wireless standards your network will support .
Mixed
• If you have Wireless-N, Wireless-G, and Wireless-B devices in your
network, keep the default, Mixed .
Wireless-B/G Only If you have both Wireless-B and Wireless-G devices in
•
your network, select Wireless-B/G Only .
Wireless-B Only If you have only Wireless-B devices, select Wireless-B
•
Only .
Wireless-G Only If you have only Wireless-G devices, select Wireless-G
•
Only .
Advanced Configuration
15