Cisco Linksys X2000 Manual Del Usuario página 191

Linksys X2000/X3000
WPA Personal
NOTE
If you select WPA Personal as your Security Mode, each device
in your wireless network MUST use WPA Personal and the same
passphrase .
Passphrase Enter a passphrase of 8-63 characters . The default is password . If
you used the setup software for installation, then the default is changed to a
unique passphrase .
WPA2/WPA Enterprise Mixed Mode
This option features WPA2/WPA used in coordination with a RADIUS server .
(This should only be used when a RADIUS server is connected to the router .)
NOTE
If you select WPA2/WPA Enterprise Mixed Mode as your Security
Mode, each device in your wireless network MUST use WPA2/WPA
Enterprise and the same shared key .
RADIUS Server Enter the IP address of the RADIUS server .
RADIUS Port Enter the port number of the RADIUS server . The default is 1812 .
Shared Key
Enter the key shared between the router and the server .
WPA2 Enterprise
This option features WPA2 used in coordination with a RADIUS server . (This
should only be used when a RADIUS server is connected to the router .)
NOTE
If you select WPA2 Enterprise as your Security Mode, each device
in your wireless network MUST use WPA2 Enterprise and the same
shared key .
RADIUS Server
Enter the IP address of the RADIUS server .
RADIUS Port Enter the port number of the RADIUS server . The default is 1812 .
Shared Key
Enter the key shared between the router and the server .
WPA Enterprise
This option features WPA used in coordination with a RADIUS server . (This
should only be used when a RADIUS server is connected to the router .)
NOTE
If you select WPA Enterprise as your Security Mode, each device
in your wireless network MUST use WPA Enterprise and the same
shared key .
Advanced Configuration
19