Wireless > Wireless Security - Cisco Linksys X2000 Manual Del Usuario

Linksys X2000/X3000
Wi-Fi Protected Setup Button Use this method if your client device has a
•
Wi-Fi Protected Setup button .
NOTE
Make sure you configure one client device at a time .
a. Click or press the Wi-Fi Protected Setup button on the client device .
b. Click the Wi-Fi Protected Setup button on the router's Wi-Fi Protected
Setup screen, OR press and hold the Wi-Fi Protected Setup button on
the back panel of the router for one second .
c. After the client device has been configured, click OK on the router's
Wi-Fi Protected Setup screen within two minutes .
Enter Client Device PIN on Router
•
has a Wi-Fi Protected Setup PIN (Personal Identification Number) .
a. Enter the PIN from the client device in the field on the router's Wi-Fi
Protected Setup screen .
b. Click the Register button on the router's Wi-Fi Protected Setup screen .
c. After the client device has been configured, click OK on the router's
Wi-Fi Protected Setup screen within two minutes .
Use this method if your client device
Enter Router PIN on Client Device
•
asks for the router's PIN .
a. On the client device, enter the PIN listed on the router's Wi-Fi Protected
Setup screen . (It is also listed on the bottom of the router .)
b. After the client device has been configured, click OK on the router's
Wi-Fi Protected Setup screen within two minutes .
For each wireless network, the Network Name (SSID), Security, and Passphrase
are displayed at the bottom of the screen .
NOTE
If you have client devices that do not support Wi-Fi Protected
Setup, note the wireless settings, and then manually configure
those client devices .
Wireless > Wireless Security
The wireless security settings configure the security of your wireless network(s) .
The router supports the following wireless security options: WPA2/WPA Mixed
Mode, WPA2 Personal, WPA Personal, WPA2/WPA Enterprise Mixed Mode, WPA2
Enterprise, WPA Enterprise, WEP, and RADIUS . (WPA stands for Wi-Fi Protected
Access . WEP stands for Wireless Equivalent Privacy . RADIUS stands for Remote
Authentication Dial-In User Service .)
NOTE
To learn more about any field, click Help on the right side of the
screen .
Advanced Configuration
Use this method if your client device
17