Panasonic SC-HC49 Instrucciones De Funcionamiento página 14

USB
No response when [1/;] is pressed.
≥ Disconnect the USB device and then reconnect it. Alternatively,
turn the unit off and on again.
The USB drive or its contents cannot be read.
≥ The USB drive format or its contents is/are not compatible with the
unit (l 16).
≥ The USB host function of this product may not work with some
USB devices.
Slow operation of the USB flash drive.
≥ Large file size or high memory USB flash drive takes longer time
to read.
The elapsed time displayed is different from the
actual play time.
≥ Copy the data to another USB device or backup the data and
reformat the USB device.
Radio
Static or noisy reception is heard while listening to
a radio broadcast.
≥ Confirm the antenna is properly connected. (l 5)
≥ Adjust the position of the antenna.
≥ Try to keep a certain amount of distance between the antenna and
AC mains lead.
≥ Try using an outdoor antenna if there are buildings or mountains
nearby. (l 5)
≥ Turn the TV or other audio players off or separate it from this unit.
≥ Keep this unit away from mobile phones if there is interference.
iPhone/iPad/iPod
Cannot charge or operate.
≥ Check that the iPhone/iPad/iPod is connected properly. (l 6)
≥ Connect the iPhone/iPad/iPod again or try to restart the iPhone/
iPad/iPod.
≥ During standby mode, charging will not start from the USB cable
connection.
Turn this unit on and make sure the charging has started before
turning this unit to standby mode.
≥ The battery of the iPhone/iPad/iPod is depleted. Charge the
iPhone/iPad/iPod, and then operate again.
– When using the port, turn this unit on. Do not turn this unit off
until the iPhone/iPad/iPod becomes operational.
14
RQT9886
Bluetooth
®
Pairing cannot be completed.
≥ Check the Bluetooth device condition.
®
The device cannot be connected.
≥ The pairing of the device was unsuccessful or the registration has
been replaced. Try re-pairing the device. (l 7)
≥ This unit might be connected to a different device. Disconnect the
other device and try re-pairing the device. (l 7)
The device is connected, but audio cannot be
heard through this unit.
≥ For some built-in Bluetooth
®
output to "SC-HC49" manually. Read the operating instructions for
the device for details.
The sound is interrupted.
≥ The device is out of the 10 m communication range. Place the
Bluetooth ® device closer to this unit.
≥ Remove any interference between this unit and the device.
≥ Other devices that use the 2.4 GHz frequency band, such as
wireless routers, microwaves, cordless phones, etc. are
interfering. Place the Bluetooth
distance it from the other devices.
≥ Select "MODE 1" for stable communication. (l 8)
The One-Touch Connection (NFC feature) is not
working.
≥ Make sure the unit and the NFC feature of the device are turned
on. (l 7)
Messages
The following messages or service numbers may
appear on the unit's display.
"--:--"
≥ You plugged the AC mains lead in for the first time or there was a
power failure recently. Set the time (l 11).
"ADJUST CLOCK"
≥ Clock is not set. Adjust the clock accordingly.
"ADJUST TIMER"
≥ Play timer is not set. Adjust the play timer accordingly.
"AUTO OFF"
≥ The unit has been left unused for about 20 minutes and will shut
down within a minute. Press any button to cancel it.
"CHECKING CONNECTION"
≥ The unit is checking the connected iPhone/iPad/iPod.
≥ If this display keeps appearing, make sure that the battery of the
iPhone/iPad/iPod is not depleted and that the iPhone/iPad/iPod is
turned on and connected correctly (l 6).
devices, you have to set the audio
device closer to this unit and
®