Setting The Timer; Others - Panasonic SC-HC49 Instrucciones De Funcionamiento

Play timer
You can set the timer so this unit turns on at a certain
time every day.
Preparation
Set the clock.

∫ Setting the timer

1
Press [SETUP] repeatedly to select "TIMER ADJ".
2
Press [3, 4] to set the starting time ("ON TIME")
and then press [OK].
3
Press [3, 4] to set the finishing time
("OFF TIME") and then press [OK].
4
Press [3, 4] to select the music source* and then
press [OK].
∫ Turning the timer on
1
Prepare the selected music source and set the
desired volume.
2
Press [SETUP] repeatedly to select "TIMER SET".
3
Press [3, 4] to select "SET" and then press [OK].
≥ "F" is displayed.
≥ To turn the timer off, select "OFF".
4
Press [Í] to turn the unit to standby mode.
≥ To display the timer settings, press [SETUP] repeatedly to
select "TIMER ADJ" and then press [OK] once.
The music source and volume will also be displayed if the
timer is turned on.
≥ During standby, if the timer is turned on, press [DISPLAY,
iPod MENU] twice to display the settings.
≥ This unit can be used as normal after the timer is set,
however:
– Turn the unit to standby mode before the timer start time.
– Even if the audio source or the volume is changed, the
timer will still use the audio source and volume that was
set when the timer was turned on.
* "CD", "USB", "FM" and "IPOD_DOCK" can be set as the
music source.
≥ For timer music source through the port for iPhone/iPad/
iPod and USB devices, select "USB".
Sleep timer
The sleep timer can turn the unit off after a set time.
1
Press [SETUP] to select "SLEEP".
2
Press [3, 4] to set the time (in minutes) and then
press [OK].
"SLEEP 30" ,. "SLEEP 60" ,. "SLEEP 90" ,. "SLEEP 120"
^------------------.
≥ The remaining time is indicated on the unit's display except
when other operations are performed.
≥ The play timer and sleep timer can be used together. The
sleep timer is always the main timer on the unit.
12
RQT9886
(------------------J
"OFF" (Cancel)

Others

Auto off function
As a factory default, this unit will turn to standby mode
automatically if there is no sound and it is not being
used for approximately 20 minutes.
To cancel this function
1
Press [SETUP] repeatedly to select "AUTO OFF".
2
Press [3, 4] to select "OFF" and then press [OK].
≥ To turn the function on, select "ON" in step 2.
≥ This setting cannot be selected when "FM" is the source.
≥ When connected to a Bluetooth
not work.
Bluetooth standby
®
When "SC-HC49" is selected from a paired Bluetooth
device's Bluetooth menu, this unit will turn on
®
automatically from standby mode and establish a
Bluetooth connection.
®
1
Press [SETUP] repeatedly to select "BLUETOOTH
STANDBY".
2
Press [3, 4] to select "ON" and then press [OK].
≥ To turn the function off, select "OFF" in step 2.
device, the function does
®
®