Mains Part - Beurer BM 57 Instrucciones De Uso

Power supply 2x 1.5 V
Battery life Lasts for approx. 150 measurements
depending on the blood pressure and
pump pressure as well as the number
of Bluetooth
Classification Internal supply, IP22, no AP or APG,
continuous operation, application part
type BF
Data transfer via The blood pressure monitor uses
Bluetooth wireless Bluetooth
®
technology 2402 MHz – 2480 MHz frequency band
Transmission power max.0 dBM
Compatible with Bluetooth
phones/tablets
List of supported smartphones/tablets
The serial number is located on the device or in the battery
compartment.
Technical information is subject to change without notification
to allow for updates.
• This device complies with European Standard EN60601-1-2
(In accordance with CISPR 11, IEC 61000-3-2, IEC 61000-
3-3, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC
61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11)
and is subject to particular precautions with regard to elec-
AA batteries
connections.
®
low energy technology
®
4.0 smart-
®
tromagnetic compatibility. Please note that portable and mo-
bile HF communication systems may interfere with this unit.
• This device corresponds to the EU Medical Devices Direc-
tive 93/42/EEC, the German Medical Devices Act (Medizin-
produktgesetz) and the standards EN1060-3 (non-invasive
sphygmomanometers – Part 3: Supplementary requirements
for electro-mechanical blood pressure measuring systems)
and IEC80601-2-30 (Medical electrical equipment – Part 2 –
30: Particular requirements for the basic safety and essential
performance of automated non-invasive sphygmomanom-
eters).
• The accuracy of this blood pressure monitor has been
carefully checked and developed with regard to a long useful
life. If using the device for commercial medical purposes, it
must be regularly tested for accuracy by appropriate means.
Precise instructions for checking accuracy may be requested
from the service address.
• We hereby confirm that this product complies with the
European RED Directive 2014/53/EU. The CE Declaration of
Conformity for this product can be found under: www.beurer.
com/web/we-landingpages/de/cedeclarationofconformity.
php.

11. Mains part

Model no. 8194047/02
Input 100 – 240 V AC, 50 – 60 Hz
Output 6 V, 600 mA, in conjunction with Beurer blood
pressure monitors only
33