Mains Part; Replacement Parts And Wearing Parts - Beurer BM 58 Manual De Instrucciones

61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-
6, IEC 61000-4-8, IEC 61000-4-11) and is subject to par-
ticular precautions with regard to electromagnetic com-
patibility (EMC). Please note that portable and mobile HF
communication systems may interfere with this unit.
• This device is in line with the EU Medical Devices Direc-
tive 93/42/EEC, the „Medizinproduktegesetz" (German
Medical Devices Act) and the standards EN 1060-1 (non-
invasive sphygmomanometers, Part 1: General require-
ments), EN 1060-3 (non-invasive sphygmomanometers,
Part 3: Supplementary requirements for electro-mechan-
ical blood pressure measuring systems) and IEC 80601-
2-30 (Medical electrical equipment – Part 2 – 30: Particular
requirements for the safety and essential performance of
automated non-invasive blood pressure monitors).
• The accuracy of this blood pressure monitor has been
carefully checked and developed with regard to a long
useful life. If using the device for commercial medical pur-
poses, it must be regularly tested for accuracy by appro-
priate means. Precise instructions for checking accuracy
may be requested from the service address.

12. Mains part

Model no. LXCP12-006060BEH
Input 100 – 240 V, 50 – 60 Hz, 0.5 A max
All manuals and user guides at all-guides.com
Output
Supplier
Protection This device is double insulated and protected
Enclo-
sures and
Protective
Covers

13. Replacement parts and wearing parts

Replacement parts and wearing parts are available from
the corresponding listed service address under the stated
material number.
34
6 V DC, 600 mA, only in connection with beurer
blood pressure monitor.
Shenzhen Iongxc power supply co., ltd
against short circuit and overload by a primary
thermal fuse.
Make sure to take the batteries out of the com-
partment before using the mains adapter.
Polarity of the the DC voltage
connection
Double insulated / equipment class 2
Equipment enclosed to protect against con-
tact with live parts, and with parts which can
become live (finger, pin, hook test).
The operator shall not contact the patient and
the output plug of AC mains adapter simulta-
neously.