Beper P204FER001 Manual De Instrucciones página 12

Steam iron Use instructions
It is suggested to empty the water tank after each use, in order to avoid the formation of limescale, mold and bad
smells. It is recommended to let the iron cool down for a few minutes before emptying the tank.
To empty the tank, turn the iron upside down on a sink (or similar) and drain all the water still left in the tank.
Otherwise, place the iron in vertical position and reconnect the plug to the electricity. Place the thermostat and
the steam control on "MAX" and allow the residual water to evaporate in the tank for a few minutes, by pressing
the steam jet button.
Cleaning of the iron
Unplug the appliance from the socket.
Remove the plug from the electrical outlet.
To remove scale or starch from the soleplate, use a damp cloth.
Always dry the soleplate after each cleaning.
Clean the body of the iron with a damp cloth without detergents.
Do not use metallic sponge or abrasive detergents.
Storage
Disconnect the power cable from the power outlet, empty the water tank (do this after each use) and let the iron
cool down completely.
Wind the cord around the base.
To protect the soleplate, place the iron in vertical position.
Technical data
Power: 1800-2200W
Power supply: 220-240V ~ 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
12