Würth MH 11-XE Traducción Del Manual De Instrucciones De Servicio Original página 11

To save energy, only switch the power tool on
when using it.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual cur-
rent device (RCD) with a rated residual current of 30 mA or
less.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol Meaning
MH 11-XE: Demolition Hammer
Grey-marked area: Handle
(insulated gripping surface)
Art. No.
Read all safety warnings and all
instructions
Before any work on the machine itself,
pull the mains plug from the socket
outlet
Wear protective gloves
Always wear ear protection.
Wear safety glasses/goggles
Symbol Meaning
Movement direction
Reaction direction
Next step of action
Chiselling
Low impact rate
High impact rate
Switching On
Switching Off
Vario-Lock
Tool holder
Apply a light coat of grease to the
shank end of the application tool
Service Indicator
P Rated power input
1
n Impact rate
S
E Impact energy per stroke according to
EPTA-Procedure 05/2009
Weight according to
EPTA-Procedure 01/2003
Protection class
L Sound power level
wA
L Sound pressure level
pA
K Uncertainty
a Vibration total value
h
11