Canon imageCLASS MF113w Configuración Rápida página 6

Quick Setup
Configuring the Machine
Configuring the Initial Settings
of the Machine
N O T E
Parts and functions of the operation panel
P.26 "Start the Operation from the Operation
Panel"
1.
En 2.
Configure the initial settings, according to the
screen.
• Set the language and country/region.
• Set the time zone and current date/time.*
• Configure the settings to prevent
unauthorized access.*
• For the purpose of confirmation, enter the
same PIN twice.
* Settings marked with an asterisk (*) may not be
displayed depending on the model you are
using.
6
Configure the settings in the following order.
Configuring the Method of
Connecting to a Computer
Before starting the configuration
• The network function cannot be used
depending on the model of the machine.
• The machine cannot be connected to
both wired and wireless LANs at the same
time.
• If the machine is connected to an
unsecured network, your personal
information might be leaked to a third
party. Please be aware and careful of this.
• The machine does not come with a
router. Please have one ready, if
necessary.
• Even in an environment without wireless
LAN router, you can use Access Point
Mode to make a wireless connection to
the machine directly from your mobile
device (Direct Connection).
User's Guide
Specifying the connection method
Use wireless LAN to
connect to network?
(Can config. later.)
Yes
• To connect via wireless LAN : <Yes>
• To connect via wired LAN or USB : <No>
To connect via wireless LAN
No