Intended Use; Charger Safety Warnings - Ryobi RY36C60A Traducción De Las Instrucciones Originales

Safety, performance, and dependability
have been given top priority in the
design of your battery charger.

INTENDED USE

This charger is intended to charge only
BPL3615, BPL3620D,
BPL3626D2, BPL3640D, BPL3640D2,
BPL3650D, BPL3650D2, RY36B60A,
RY36B90A, and RY36B12A battery
packs listed in this manual.
The product is only for indoor use, in dry
conditions.
The product is not intended to charge
any other type of battery or be used
as a power supply. It should never
be used in explosive or infl ammable
environments.
Do not use the product for any other
purpose.

CHARGER SAFETY WARNINGS

WARNING
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result
in electric shock, fire, and/or serious
injury.
WARNING
Do not recharge primary cells
(non-rechargeable).
WARNING
Mains voltage must correspond with
the voltage specifications on the
product.
■ Before using the product, check that
the charger enclosure, cable, and
plug are not damaged. If damage
is found, do not use the product
2 | English
and bring it to an authorised service
centre for repair.
■ The product must not be damp and
should never be used in a damp
environment.
■ The product is for indoor use only.
BPL3626D,
■ Do not use the product if it has
suffered any heavy shock or jolting,
or if it is damaged in any other way.
■ When charging, do not expose
the product to sunlight or other
heat source. The recommended
temperature
vicinity is 10° to 25°C.
■ Due to the heat generated during
charging, do not use the product on
a combustible surface.
■ Do
flammable materials, such as cloth,
packaging materials, paint, spray
paint or aerosols, lubricants, thinners,
petrol containers, gas containers, or
gas appliances.
■ Do not cover any ventilation slots,
and provide adequate ventilation
during operation.
■ Never
attempt to repair the product yourself.
■ Do not allow the charger or battery
packs
with any material that could be
conductive, such as metallic particles
from grinding, cutting, or machining
processes.
■ Unplug the product from the power
socket when it is not in use or when
cleaning it.
■ Use only an extension cable that is
approved and in good condition.
■ Do not charge battery packs that
show signs of leaks. Dispose of them
range at
not use the product
modify, disassemble,
to become contaminated
charging
near
or