marklin 66471 Manual De Instrucciones página 13

2. Connecting the Transformer
Make sure that the power cords for all of the transformers
used with your layout are disconnected from the household
current before connecting a transformer to the layout!
Possible Uses for the Transformer
Train operation with AC current for Märklin H0 or 1.
Conventional hookup of turn o uts and signal mechanisms.
Conventional hookup of model railroad lighting.
Feeder Tracks
K Track: 2290, 2292
One 2292 interference suppression set should be used with
each transformer used to operate trains.
Feeder Wire Sets
K-Track: 5904, C-Track: 74046, 74040
One 74046 interference suppression set should be used with
each transformer used to operate trains.
Preparing the wire and making connections with it
2 3
1
Pay particular attention when doing this
Connect the red third rail wire from the feeder track to the
red terminal clip ("B" = track power) on the 32 VA Transfor-
mer. Then connect the brown ground return wire from the
feeder track to the brown terminal clip ("0" = ground) on the
32 VA Transformer  Figure 1, page 58.
Important!
!
The feeder wires from the layout to the transformer
must never be plugged into a household power
outlet. Make sure your children are aware of this
danger!
5
4
13