Set Clock; Switch Clock Display; Alarm - Oregon Scientific WRB603 Manual De Usuario

it, press and hold for 2 seconds. This icon
will only appear on the display when the atomic clock is
enabled.

SET CLOCK

You only need to do this if you have disabled the atomic
clock, or if you are too far from the atomic clock signal.
1. Press and hold MODE for 2 seconds.
2. Press or to change the setting. (Press and
hold to scroll quickly through the options.)
3. Press MODE to confirm and move onto the next
one.
4. The settings will appear in the following order:
Time zone, 12 / 24 hour format, hour, minute,
year, month / day format, month, date, and
display language.
NOTE The time zones available are P (Pacific), M
(Mountain), C (Central) and E (Eastern).
NOTE The language options are E (English), F (French)
and S (Spanish). The language you select determines
the weekday display.

SWITCH CLOCK DISPLAY

Press MODE to toggle between Clock with Seconds,
Clock with Weekday and Calendar display.
,

ALARM

This product is equipped with 2 alarms.
To view alarm settings:
Press to toggle between alarm 1, alarm 2 and clock
display. The alarm time and status will show in the Clock
Area.
To set the alarm:
1. Press once to select alarm 1 and twice to select
alarm 2.
2. Press and hold
mode.
3. The alarm settings will blink. Press
change settings – hour and minute. (Press and
hold to scroll quickly through the options.) Press
to confirm.
To activate or deactivate the alarm:
Press once to select alarm 1 and twice to select
alarm 2. Then press
the alarm.
• "-:--" appears when the alarm is deactivated.
12
for 2 seconds to enter setting
or
or to activate or deactivate
to