Weather Forecast Display; Temperature And Humidity - Oregon Scientific WRB603 Manual De Usuario

• or shows in the Clock / Alarm Area when
the alarm is activated.
To silence the alarm:
When the alarm time is reached, the crescendo alarm
will sound for 2 minutes. To silence the alarm:
• Press SNOOZE to silence it for 8 minutes.
OR
• Press any key on the weather station except SNOOZE to
mute the alarm and activate it again after 24 hours.
If no button is pressed, the alarm will automatically
silence after 2 minutes. It will then sound again after 8
minutes.

WEATHER FORECAST DISPLAY

This product forecasts the next 12 to 24 hours of weather
within a 30-50 km (19-31 mile) radius with 70 to 75
percent accuracy. The weather forecast is always
displayed.
SUNNY PARTLY CLOUDY

TEMPERATURE AND HUMIDITY

This product can display current, minimum, and NOTE
RAINY SNOWY
13
maximum temperatures and humidity percentage
information collected by the remote sensor(s) and
weather station (indoor).
Outdoor data is collected and displayed approx. every
60 seconds. Indoor data is collected and displayed every
10 seconds.
To select temperature unit:
° °
Slide the C / F switch into the desired location. The
switch is located on the back of the weather station. The
setting for the weather station overrides the remote
sensor setting.
To select channel:
Press CHANNEL to switch between sensors 1-5.
The icon shows the selected sensor:
INDOOR CHANNEL CHANNEL CHANNEL CHANNEL CHANNEL
1 2
To auto-scan between sensors:
Press and hold CHANNEL for 2 seconds. Each sensor's
data will be displayed for 3 seconds. To end auto-scan,
press CHANNEL or MEMORY.
NOTE If you use a sensor that collects only temperature
data, humidity will not be shown.
3 4 5