Change Settings; Reception Signal Status - Oregon Scientific WRB603 Manual De Usuario

To switch between the radio status mode displays, press
NOTE Leaving the radio in NOAA ON mode will consume
substantially more power. To save power, set the unit to
NOAA Standby when you are not listening to radio
broadcasts.

CHANGE SETTINGS

To change, clock, alarm, channel and location settings:
1. Press and hold MENU for 2 seconds to enter setting
mode.
2. Press
options (Set Alarm / Set Clock / Set Channel / Set
Location) and press MENU to select the desired
one.
3. Use or
.
press MENU to confirm and move onto the next
one.
4. Press EXIT to leave the setting mode at any time.
NOTE To reach a number quickly, press and hold
or .

RECEPTION SIGNAL STATUS

To check the status of the reception signal, look at the
reception icon on the display.
ICON DESCRIPTION
Current selected channel signal is strong
Current selected channel signal is weak
No NOAA alert message has been received for
10 days. Current selected channel signal is weak
No NOAA alert message has been received for
10 days. Current selected channel signal is strong
15
or to scroll through the setting
to change a setting, then