Radio Wr602 - Clock & Calendar; Radio Wr602 - Alarm; Radio Wr602 - Volume - Oregon Scientific WRB603 Manual De Usuario

RADIO WR602 – CLOCK & CALENDAR
To set the time and date, navigate to "Set Clock" setting
mode as shown in the Changing Settings section. The
order of the settings is:
• 12 / 24 hour format, hour, minute, month / day
format, year, month, day and day of the week
language (English, French or Spanish).
NOTE The day of the week language you select will
also be used for the NOAA alert messages.
NOTE When the radio is placed in the recharging cradle,
the weather station will automatically synchronize the
time with the atomic clock time (unless this feature has
been disabled).
RADIO WR602 – ALARM
The unit has 2 alarms (alarm 1 and 2). They can be
used together or independently. Alarms 1 and 2 have
different sounds so that you can differentiate them. The
alarm will sound for 1 minute unless it is disabled.
To set the alarm:
Navigate to "Set Alarm" setting mode as shown in the
Changing Settings section. The order of the settings is;
alarm 1 or 2, hour and minute.
To silence the alarm:
• Press to silence it for 8 minutes.
• Press and hold
, to turn the alarm OFF and activate it again at
the same time the next day.
To enable or disable the alarm:
• Press MENU until you reach alarm 1 or 2 display.
• Press or
alarm. "-:--" means disabled.
The alarm icon
default display when the alarm is enabled.
RADIO WR602 – VOLUME
To set the radio volume:
1. In the clock display mode, set the radio to NOAA
ON by pressing
2. Press or
(Maximum volume is 7 / minimum volume is 1.)
25
, or press any button except
to enable or disable the
or will appear on the clock
.
to adjust the volume.