ausdom AH2 Manual De Instrucciones página 5

Note:
When using the mobile phone and headphone for a Wireless
connection, the distance between both can not exceed 10
meters.
You can only communicate with one device via Wireless
connection. To switch between Wireless devices, disconnect the
headphone from the current device (disable the Wireless
feature) before connecting to another.
7. Answering a Call
Before answering a call, make sure the headphone is already
paired with the mobile phone. Refer to "6. Pairing Configurations"
to get more pairing information.
1.Press and hold the power button for 2 seconds to power on the
headphone.
2.For a moment, the headphone will enter "Pairing Mode" directly
if it has ever been paired with the Wireless device.
3.The LED indicator turns solid blue indicating the pairing is
connected between the headphone and mobile phone.
4.Using the mobile phone to dial a number.
5.When the call is connected, press the power button on the
headphone to talk with the build-in microphone.
6.To end the call, press the power button once. You can also use
the mobile phone to end a call.
Dial phone number
Note:
You can press + or – button located on the side of your
headphone to adjust the volume. When the volume is adjusted to
maximum or minimum, the headphone will sounds an alert tone.
Incoming call
EN-4
Wireless connection
Hello