Troubleshooting; Try These Solutions First; Other Solutions - Bose SOUNDLINK REVOLVE + II Manual Del Usuario

Ocultar thumbs Ver también para SOUNDLINK REVOLVE + II:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 146

TRY THESE SOLUTIONS FIRST

If you experience problems with the speaker:
• Check the battery light 6 (see page 28). Charge your speaker if necessary.
• Secure all cables.
• Check the state of status lights (see page 28).
• Place your speaker according to placement guidelines (see page 13).
• Make sure your mobile device supports Bluetooth or pairing via NFC technology
(see page 21).

OTHER SOLUTIONS

If you could not resolve your issue, see the table below to identify symptoms and
solutions to common problems. If you are unable to resolve your issue, contact
Bose customer service.
Visit: worldwide.Bose.com/contact
SYMPTOM
No power (battery)
Battery does not charge
Speaker does not pair
with mobile device
Speaker does not pair
with NFC
TR OUBL ES H O OTI N G
SOLUTION
Battery may be in protection mode or discharged. Connect it to
AC (mains) power.
Make sure you are using the Bose-provided USB cable and USB
power supply.
Connect the USB cable to a different USB power supply.
Use a different USB cable.
Connect to a different AC (mains) power source.
On your mobile device, turn the Bluetooth feature off and then
on. Remove your speaker from the Bluetooth list on your device.
Pair your device again.
Pair a different device (see page 24).
Clear your speaker's pairing list (see page 25). Pair your
device again.
Reset your speaker (see page 37).
Unlock your device and turn on the Bluetooth and NFC features.
Tap and hold the NFC touchpoint on the back of your device to
the top of your speaker.
Remove your device from the case.
Make sure a language is selected (see page 20).
Use Bluetooth to pair your device (see page 22).
|
3 5
E N G

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido