How To Install The Product; Main Installation Tasks - Axis Q8685-LEPTZ Guia De Instalacion

How to install the product

Main installation tasks

1. Mount the base unit on page 20
2. Route the cables on page 22
3. Install the network link on page 27
4. Connect the cables on page 28
5. Install the illuminator kit. Follow one of two installations:
- Install the illuminator kit (default installation) on page 29
- Inverted installation on page 34, followed by Install the illuminator kit (inverted
installation) on page 37
6. How to access the product on page 42
7. Set the inverted configuration on page 43
8. Enable the illuminator kit on page 43
9. Install an SD card (optional) on page 44
DANGER
Risk of electric shock. All cables shall be de-energized before installing the product.
CAUTION
The electrical connections and conduit installations shall be made by a certified electrician
and in compliance with local regulations.
CAUTION
Risk of injury. Moving parts. Keep your body parts away from the product when in
operation. Disconnect from power supply before installing or performing maintenance
on the product.
CAUTION
Risk of injury. Hot surface. Do not touch the product when in operation. Disconnect
from power supply and allow the surfaces to cool before performing maintenance on
the product.
AXIS Q8685-LE PTZ Network Camera
19
EN