Incorrect Measurement - Beurer BG 65 Instrucciones Para El Uso

3. Incorrect measurement

If the scale detects an error during weighing, „Err" appears in the display.
Possible causes for errors:
– The scale was not activated before being stepped
on to
– The maximum 150 kg weight-bearing capacity was
exceeded
– The electrical resistance between the electrodes
and the soles of your feet is too high (e.g. in cases
of extremely hard skin)
– You did not stand still enough on the scale
– Your body fat is not within the measurable range
(less than 5% or greater than 50%)
– The percentage of water lies outside the measurable
range (less than 43% or greater than 75%)
Error handling:
– Activate the scale correctly and reweigh
– Only weigh maximum permitted weight
– Please repeat the measurement with bare feet.
If necessary, you can wet your feet a little.
If necessary, calluses should be removed on the
soles of the feet.
– Please stand still
– Please weigh again, this time with bare feet.
If necessary, you can wet your feet a little.
– Please weigh again, this time with bare feet.
If necessary, you can wet your feet a little.
12