Kettler CTR3 Manual Del Usuario página 4

GB USA Important Instructions
I In case of enquiry, please contact your KETTLER dealer.
I In choosing the location of the apparatus, ensure a sufficient sa-
Handling the equipment
I Before using the equipment for exercise, check carefully to en-
sure that it has been correctly assembled.
I Before beginning your first training session, familiarize yourself
thoroughly with all the functions and settings of the unit.
I It is not recommended to use or store the apparatus in a damp
room as this may cause it to rust. Please ensure that no part of
the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.
I The machine is designed for use by adults and children should
not be allowed to play with it. Children at play behave unpre-
dictably and dangerous situations may occur for which the ma-
nufacturer cannot be held liable. If, in spite of this, children are
allowed to use the equipment, ensure that they are instructed in
its proper use and supervised accordingly.
I The crosstrainer complies with the DIN EN 957 - 1/9, class
HA. It is therefore suitable for therapeutic use.
I A slight production of noise at the bearing of the centrifugal
mass is due to the construction and has no negative effect upon
operation. Possibly occurring noise during reverse pedalling re-
Instructions for Assembly
I Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
I Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
I The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if
possible technically talented.
I Please note that there is always a danger of injury when wor-
king with tools or doing manual work. Therefore please be ca-
reful when assembling this machine.
I Ensure that your working area is free of possible sources of
danger, for example don't leave any tools lying around. Al-
ways dispose packaging material in such a way that it may not
List of spare parts page 22-24
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the pro-
duct (see handling).
Example order: Art. no. 07862-700 / spare-part no. 10100079
/ 2 pieces / S/N ....................
Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in (in-
ternal) packaging, which is safe for transportation, in the original
box if possible.
It is important to provide a detailed defect description / damage
report!
4
fety distance from any obstacles. The apparatus must not be mo-
unted in the immediate vicinity of main passageways (paths, do-
orways, corridors).
sult from engineering and are absolutely safe.
I Use for your regular cleaning, maintenance and care our ap-
pliance maintenance set (Article no. 07921-000) specifically li-
censed for KETTLER Sports apparatus and available from the
Sport specialized trade.
I The crosstrainer has a magnetic brake system.
I
The equipment is independent of revolutions per minute.
I Please ensure that liquids or perspiration never enter the ma-
chine or the electronics.
I Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.
I Always wear suitable shoes when using.
I All electric appliances emit electromagnetic radiation when in
operation. Please do not leave especially radiation-intensive
appliances (e.g. mobile telephones) directly next to the coputer
or the electronic control system as otherwise values displayed
might be distorted (e.g. pulse measurement).
cause any danger. There is always a risk of suffocation if child-
ren play with plastic bags!
I The fastening material required for each assembly step is sho-
wn in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.
I Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be repla-
ced.
I For technical reasons, we reserve the right to carry out preli-
minary assembly work (e.g. addition of tubing plugs).
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this
should be clearly stated on the order by adding the words „with
fastening material".
Waste Disposal
KETTLER products are recyclable. At the end of its
useful life please dispose of this article correctly and
safely (local refuse sites).