Klarstein 10031084 Manual De Instrucciones página 15

Plug 2GX13 40W assembly chart:
After locking the canopy, remove the
lampshade, place the bulb into the
lamp holder and insert the T5 bulb
plug into the socket, hearing "click"
sound, it means the lamp socket are
tightened. Let the lamp mounting
hole aim at the screw and fix the
screw with 6mm Hex wrench.
Plug G10Q 40W assembly chart:
7
After locking the canopy, loosen the screw on lampshade. Install T5 circular lamp into the spring clips,
then push lamp holder into the T5 circular lamp socket. Align holes on lampshade to the fan body.
Finally tighten the washers and screw with 6mm Hex wrench.
15