1. POWER: Press the button to turn the unit on or off. The unit automatically starts in cooling mode with low fan
speed.
2. MODE: Press the Mode button after starting the unit to select between cooling, dehumidifying or fan mode.
3. FAN: Press the Fan button after starting the unit and adjust the desired fan speed.
4. TEMPERATURE - / TEMPERATURE +: Switch the unit into the cooling mode and use these buttons to adjust
desired room temperature (16-31°C).
6. TIMER: Turn the unit on and leave it in standby mode, then press this button to set the timer. You can set the
desired on or off time using the ▲ and ▼ keys (1h-24h).
Remote control
Functions
Cooling mode
Press the MODE button to set the cooling mode, the cooling mode indicator lights.
•
Press the ▲ or ▼ to adjust to the temperature (16°C – 31°C).
•
•
Press the SPEED button to adjust the fan speed (high or low).
Fan mode
Press MODE button to turn on the fan mode, the fan mode indicator lights.
•
•
Press the SPEED button to adjust the fan speed (high or low).
Timer
In standby mode, press the TIMER button to set the on-time. The timer indicator lights up.
•
After starting the unit press the TIMER button to set the off-time. The timer indicator goes off.
•
Dehumidifying mode
Drücken Sie die Taste MODE, um den Entfeuchtungsmodus einzustellen, der Entfeuchtungsmodus-
•
Indikator leuchtet.
Temperatureinstellung und Schlafmodus können nicht eingestellt werden, die Geschwindigkeit des
•
Ventilators bleibt automatisch niedrig.
Compressor protection
•
The compressor requires a start-up phase and will start three minutes later on after turning on / reboot
the device.
Frost protection
•
In cooling, dehumidifying and sleeping modes, the unit has an automatic frost protection function
designed to protect the unit at low temperatures. The device also has an automatic defrosting function.
1
Power
2
Timer
3
Mode
4
Speed
5
Temperature +
6
Temperature -