Bosch 0 601 594 1 Serie Manual Original página 17

OBJ_BUCH-446-002.book Page 17 Wednesday, December 3, 2008 8:53 AM
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for planing of firmly
supported wooden materials, such as beams
and boards. It is also suitable for beveling edges
and rebating.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Planing depth scale
2 Depth adjustment knob
3 Chip ejector (alternatively right/left)
4 Lock-off button for On/Off switch
5 On/Off switch
6 Belt cover
7 Screw for belt cover
8 Chip ejection selector lever
9 Planer base plate
10 V-grooves
11 Blade drum
12 Clamping element for blade
13 Fastening screw for planer blade
14 Carbide blade (TC)
15 Allen key
16 Extraction hose (Ø 35 mm)*
17 Chip/dust bag*
18 Parallel guide
19 Scale for rebating width
20 Locking nut for adjustment of rebating
width
21 Fastening bolt for parallel and beveling
guide
Bosch Power Tools
22 Angle stop*
23 Locking nut for angle adjustment
24 Fastening bolt for rebating depth stop
25 Rebating depth stop*
26 Park rest
27 Drive belt
28 Large pulley
29 Small pulley
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Planer
Article number
Rated power input
Output power
No-load speed
Planing depth
Rebating depth
Planing width, max.
Weight according
to EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 84 dB(A);
Sound power level 95 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
1 609 929 S28 | (3.12.08)
English | 17
GHO 26-82
Professional
0 601 594 1..
0 601 594 3..
W 710
W 400
-1
min 16500
mm 0 – 2.6
mm 0 – 9
mm 82
kg 2.6
/II