Hazards Resulting From Damaged Mechanical Devices - Milnor 42044 Manual Del Usuario

WARNING: Entangle and Crush Hazards — Guards, covers, and panels—Operating
2.4.1.2

Hazards Resulting from Damaged Mechanical Devices

WARNING: Multiple Hazards — Operating a damaged machine can kill or injure per-
void the warranty.
Do not operate a damaged or malfunctioning machine. Request authorized service.
�
WARNING: Explosion Hazards — Cylinder—A damaged cylinder can rip apart dur-
WARNING: Explosion Hazards — Inner door latches (divided cylinder machines)—A
Do not operate the machine with any evidence of damage or malfunction.
�
WARNING: Explosion Hazards — Clutch and speed switch (multiple motor ma-
Pellerin Milnor Corporation
the machine with any guard, cover, or panel removed exposes moving
components.
Do not remove guards, covers, or panels.
�
sonnel, further damage or destroy the machine, damage property, and/or
ing extraction, puncturing the shell and discharging metal fragments at
high speed.
Do not operate the machine with any evidence of damage or
�
malfunction.
damaged or improperly seated latch can cause the inner door to open dur-
ing operation, damaging the cylinder and shell. A damaged cylinder can
rip apart during extraction, puncturing the shell and discharging metal frag-
ments at high speed.
Ensure that the inner door is securely latched after loading and
�
unloading.
chines)—A damaged clutch or speed switch can permit the low speed mo-
tor to engage during extract. This will over-speed the motor and pulleys
and can cause them to rip apart, discharging metal fragments at high speed.
Stop the machine immediately if any of these conditions occur: • ab-
�
normal whining sound during extract • skidding sound as extract ends •
clutches remain engaged or re-engage during extract
BNWVUS04.C04 0000235090 A.3 A.7 A.4 12/11/20 8:32 AM Released
For All Users
11