Synergic Curves Screen; General; Synergic Curves; Programs Screen - voestalpine Bohler URANOS 2000 SMC Instrucciones De Uso

3.7 Synergic curves screen

3.7.1 General

Allows the selection of the required welding method.
1 It allows the selection of:
Synergic welding method
Makes it possible to use a series of pre-settings
(synergic curves) available in the memory of the
system.
The changing and correction of the initial set-
tings proposed by the system is allowed.
Manual welding method
Allows the manual setting and regulation of
each individual welding parameter (MIG/
MAG).
Select however one of suggested synergies (5-6) in
order to take advantage of ignition potentiality,
closing arc features....
2/3 Lets you select:
- type of filler material
- gas type
4 Lets you select:
- wire diameter
5 Lets you select:
- Type of filler material
- Gas type
6 Wire diameter
7 Header
(See the "Main screen" section).
NO PROGRAM
Indicates that the selected synergic program is not avail-
able or is not consistent with the other system settings.

3.7.2 Synergic curves

Filler
material
MILD STEEL CO 2
MILD STEEL Ar 18%CO 2
STAINLESS STEEL Ar 2%CO 2
ALUMINUM Ar
CuSi Ar
FCW STEEL Ar 18%CO 2
FCW STEEL No Gas
S-STEEL Ar 18%CO 2

3.8 Programs screen

1 General
Allows the storage and management of 8 welding pro-
grams which can be personalised by the operator.
1/2/3/4 Functions
5 Number of the selected program
6 Main parameters of the selected program
7 Description of the selected program
8 Heading
(consult the "Main screen" section).
2 Program storage
Enter the "program storage" menu by pressing button
for at least 1 second.
Gas Ø Prog.
type (mm) Code
0.6 79.S1.001
0.8 79.S1.002
1.0 79.S1.003
0.6 79.S1.006
0.8 79.S1.007
1.0
79.S1.008
0.6 79.S1.049
0.8 79.S1.050
1.0 79.S1.051
0.8 79.S1.106
1.0 79.S1.107
0.8 79.S1.098
1.0 79.S1.099
1.0 79.S1.031
1.2 79.S1.032
0.9 79.S1.137
1.2 79.S1.138
0.9 79.S1.085
1.2 79.S1.086
45