Main Screen - voestalpine Bohler URANOS 2000 SMC Instrucciones De Uso

3.4 Main Screen

Allows the control of the system and of the welding process,
showing the main settings.
MMA
TIG DC
MIG/MAG
1 Welding parameters
MMA / TIG DC
MIG/MAG
40
1a Parameter icon
1b Parameter value
1c Unit of measurement of the parameter
2 Functions
Allow the setting of the most important process func-
tions and welding methods.
MMA
TIG DC
MIG/MAG
2a
Allows the selection of the welding process
MMA
TIG DC
Standard MIG/MAG
2b
Synergy
Allows you to set the best arc dynamics, selecting the
type of electrode used:
Basic Basic
Rutile Rutile
CLS Cellulose
CrNi Steel
Alu Aluminium
Cast iron Cast iron
Selecting the correct arc dynamics enables maximum
benefit to be derived from the power source to achieve
the best possible welding performances.
Perfect weldability of the electrode used is not guaran-
teed (weldability depends on the quality of the consum-
ables and their preservation, the operating and welding
conditions, the numerous possible applications, etc.).
2c
Synergy
Allows the selection of the electrode diameter (Ø mm)
1.5 ÷ 6.0 mm