Important Remarks; Basic Operation - Conceptronic CMED3PLUS Guía De Instalación Rápida

Ocultar thumbs Ver también para CMED3PLUS:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
ENGLISH
5

Important remarks

The maximum operational range of the remote control is about 5 meters.
1. Point the remote to the receiver on the front panel of the device.
The receiving angle is about ±30 degrees in the range of 5 meters.
2. Change the batteries when they are weak or empty.

5.1 Basic Operation

1. Plug the power adapter into a working electrical outlet and connect the other end of the
adapter to the device.
2. Switch the device on with the power switch on the back of the device. The Power LED will
become solid blue. The device is now operational.
When there is no other device connected to the CMED3PLUS, it will show the FILE LIBRARY
with the contents of your Harddisk (If only 1 partition is present).
When an USB Device (like a Harddisk or USB Flashdrive) or Memory Card is connected to the
CMED3PLUS, the screen will show the DEVICE LIST with all found devices. If the connected
device contains a large quantity of files, it can take a little while before the device is
detected. Please wait for the DEVICE LIST / FILE LIBRARY screen.
Notices
• Usually, it is not necessary to change your video system (PAL/NTSC), but if the TV only
supports NTSC or PAL, you should use the P/N button to select a color system to match your
TV system.
• If "AUTO START" is ON (press the SETUP button->SETUP MENU->PREFERENCES->AUTO START-
>ON), all files on the connected devices will be played automatically; Pressing the
button can stop auto-playing and display a full file list of the selected partition.
• Press one of the / / / buttons to move the cursor, and use the
confirm selection (enters media library, enters file folder, or starts playing files).
• Press the
/ STOP button button to stop playing and go back to FILE LIBRARY.
• Press the MENU button to show the DEVICE LIST or FILE LIBRARY.
• Press the
/ POWER button to enter/exit standby mode.
• We advise you to disconnect the device from power if the device will not to be used for a long
time.
26
/ STOP
/ ENTER button to

Publicidad

Tabla de contenido
loading

Tabla de contenido