General Control; Demonstration Mode; Bass Control - Sharp CD-M10000W Manual De Manejo

General control

! Demonstration mode

The first time the unit is plugged in, the unit will enter
the demonstration mode. You will see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode), press the MON-
STER-BASS button. The demonstration mode will be cancelled and the display will
disappear.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the MONSTER-BASS button
again.
Note:
When the power is on, the MONSTER-BASS button can be used to select the extra
bass mode.
! To turn the power on
Press the ON/STAND-BY button to turn the power on.
To set the unit to stand-by mode:
Press the ON/STAND-BY button again.
! To change the display brightness (2 levels)
You can switch the display brightness by pressing the DIMMER button.
Dimmed
! Volume control
Main unit operation:
When the VOLUME control is turned clockwise, the volume will increase. When it is
turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME button to increase the volume and the VOLUME
decreasing.
.....
0 1 2 29 30 MAXIMUM

! Bass control

When the power is first turned on, the unit will enter the monster bass
mode which emphasises the bass frequencies, and the monster bass
mode indicator will light up. To cancel this, press the MONSTER-BASS
(MONSTER BASS) button.
! Equalizer
When the EQUALIZER (EQ-MODE) button is pressed, the current mode setting will
be displayed. To change to a different mode, press the EQUALIZER (EQ-MODE) but-
ton repeatedly until the desired sound mode appears.
FLAT
The sound is not modified.
ROCK Bass and treble are emphasised.
POPS
Bass and treble are slightly emphasised.
JAZZ Treble is cut a little.
CLASSIC Treble is reduced a lot.
VOCAL Vocals (midrange tones) are emphasised.
01/10/1 CD-M10000W(X)E2.fm
CD-M10000W
ENGLISH
Brightened
button for
E-12
1
2
3
4
5
6
7