Basic Operations; Turning The Unit On; Selecting A Source; Adjusting The Volume - Pioneer AXM-P7650 Manual De Instrucciones

Section
03

Basic Operations

Turning the unit on

% Press SOURCE to turn the unit on.
When you select a source the unit is turned
on.

Selecting a source

% Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
Digital source 1Digital source 2Televi-
sionDVD player/multi-DVD player
Multi-CD playerExternal unit 1Exter-
nal unit 2AUXAnalog source 1Ana-
log source 2Analog source 3Analog
source 4Analog source 5Analog
source 6
Notes
! DVD source (DVD player/multi-DVD
player) and Digital sources (Digital source1
and 2) can exist simultaneously. However,
DVD player which is connected to the multi-
channel processor (DEQ-P7650) via the IP-
BUS and optical cable should be connected
to OPT IN. 1 connector. Also, equipment
which is connected to the multi-channel pro-
cessor only via the optical cable should be
connected to OPT IN. 2 connector. If not, this
may not operate properly.
! When no source is connected, short beep will
sound when you try to select a source.
! In the following cases, the sound source will
not change:
 When there is no unit corresponding to the
selected source connected to this unit.
 When there is no magazine in the multi-
CD player.
 When there is no magazine in the multi-
DVD player.
 When there is no disc in the DVD player.
10
En
All manuals and user guides at all-guides.com
 When the AUX (auxiliary input) is set to off
(refer to page 34).
 When the analog sources are set to off
(refer to page 35).
! External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.

Adjusting the volume

% Use VOLUME to adjust the sound level.
Press to increase or decrease the volume.

Turning the unit off

% Press SOURCE and hold until the unit
turns off.