Scanning Cds And Tracks; Pausing Cd Playback; Using Its Playlists - Pioneer AXM-P7650 Manual De Instrucciones

Section
06
Multi-CD Player
Note
If you turn random play on during DISC and then
return to the playback display, D.RANDOM ap-
pears in the display.

Scanning CDs and tracks

While you are using DISC, the beginning of
each track on the selected disc plays for about
10 seconds. When you are using MCD, the be-
ginning of the first track of each disc is played
for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press o to select Scan.
Press o until Scan appears in the display.
3 Press r to turn scan play on.
Scan :ON appears in the display. The first 10
seconds of each track of the current disc (or
the first track of each disc) is played.
4 When you find the desired track (or
disc) press q to turn scan play off.
Scan :OFF appears in the display. The track (or
disc) will continue to play.
# If the display has automatically returned to
the playback display, select Scan again by press-
ing o.
Notes
! After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
! If you turn scan play on during DISC and then
return to the playback display, T.SCAN ap-
pears in the display.
16
En
All manuals and user guides at all-guides.com

Pausing CD playback

Pause lets you temporarily stop disc playback.
1 Press o to select Pause.
Press o until Pause appears in the display.
2 Press r to turn pause on.
Pause :ON appears in the display. Play of the
current track pauses.
3 Press q to turn pause off.
Pause :OFF appears in the display. Play will re-
sume at the same point that you turned pause
on.

Using ITS playlists

ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS
programming
You can use ITS to enter and play back up to
99 tracks per disc, up to 100 discs (with the
disc titles). (With multi-CD players sold before
the CDX-P1250 and CDX-P650, up to 24 tracks
can be stored in the playlist.)
1 Play a CD that you want to program.
Press q or r to select a CD.
2 Press o and hold until TITLE appears
in the display, then press o to select ITS.
After TITLE is displayed, press o repeatedly,
the following functions appear in the display:
TITLE (disc title input)ITS (ITS program-
ming)