REVPIP
What to do
7.
Repeat aspiration
of liquid in revPIP
mode
8.
Initiate blow-out
9.
End pipetting
How to do it
Press the pipetting key again
and the set volume is aspi-
rated into the tip. Press the
pipetting key again and the
volume is discharged again,
and so on...
Press the ENTER key after
the last pipetting operation.
The display shows 'blo' for
blow-out.
Press the pipetting key once
to initiate the blow-out
process. The residual liquid is
discharged.
After the residual liquid is
discharged (blow-out), the
display moves back to the
start position.
Keys to press
Display readout
1x
1x
1x
17
ErgoOne E · User Manual ·