SETTING THE ASPIRATION AND DISCHARGING SPEED
The aspiration and discharging speeds can be individually adjusted. When the menu is called up, the last
speed setting is shown. Five speed levels are available.
What to do
Setting the aspiration speed
1.
Bring up the menu
2.
Change the
aspiration speed
3.
Confirm speed level
Setting the discharging speed
1.
Bring up the menu
2.
Change the
discharging speed
3.
Confirm speed level
How to do it
Press the MENU key once
to bring up the aspiration
speed menu. 'Speed' blinks.
Press either the UP or DOWN
key to select the desired
speed (in this case, level 5).
'Speed' continues to blink.
Press the ENTER key. The
display returns to the start
position for the current
pipetting mode (in this case,
the standard PIP mode).
Press the MENU key twice
to bring up the discharging
speed menu. 'Speed' blinks.
Press either the UP or DOWN
key to select the desired
speed (in this case, level 2).
'Speed' continues to blink.
Press the ENTER key. The
display returns to the start
position for the current pipet-
ting mode (in this case, the
standard PIP mode).
Keys to press
Display readout
1x
+
–
1x
2x
+
–
1x
9
ErgoOne E · User Manual ·