Setting The Volume - StarLab ErgoONE E Instrucciones De Manejo

SETTING THE VOLUME

The volume for the ErgoOne
ment and can be changed quickly and easily.
What to do
1.
Activate volume
setting
2.
Change the volume
Reduce volume
Increase volume
3.
Confirm volume
setting
IMPORTANT:
By pressing the MENU key any procedure can be cancelled! The display then moves to
the next setting or back to the initial display (depending on actual selection.)
8
· ErgoOne E · User Manual
E is set at the factory to the nominal volume of the instru-
®
How to do it
Press either the UP or DOWN
key to activate volume selec-
tion 'VOL' blinks.
Press the DOWN arrow key
(-) to reduce the volume.
Pressing and holding the key
down accellerates the rate
of change. 'VOL' continues
to blink.
Press the UP key (+) to
increase the volume. Press-
ing and holding the key
down accelerates the rate
of change. 'VOL' continues
to blink.
Press the ENTER key.
The display now shows the
new volume setting, in this
case, 102.8 µl in the PIP
mode.
Keys to press Display readout
–
+
1x