Operation; Turning The Tv On And Off; Plug & Play Feature - Samsung PL-63P71FD Manual Del Usuario

Operation

Turning the TV On and Off

Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢ It may take a while when your TV starts.
Plug & Play Feature
When the TV is initially powered On, basic settings proceed automatically and subsequently:
1 Press the POWER button on the remote control.
The message Menu language, Shop Mode, Channels and Time will be set. is
displayed.
2 Press the ENTER button, the Select the language of the OSD menu is
automatically displayed.
Press the ▲ or ▼ button to select language, then press the ENTER button.
The message Select Home Mode when installing this TV at home. is
automatically displayed.
3 Press the ◄ or ► button to select Shop or Home, then press the ENTER
button.
The default selection is Home.
➢
➢ We recommend setting the TV to Home mode for the best picture in your
home environment.
Shop mode is only intended for use in retail environments.
➢
➢ If the unit is accidentally set to Shop mode and you want to return to
Dynamic (Home) mode, press any Volume button and then hold down the
MENU button for five seconds on the TV panel.
4 Press the ▲ or ▼ button to memorize the channels of the selected connection.
Press the ENTER button to select Start.
If the antenna is connected to ANT1 IN(AIR), select Air and if it is connected
➢
to ANT 2 IN(CABLE), select Cable.
➢ If both ANT 1 IN(AIR) and ANT 2 IN(CABLE) are connected,
select the Air + Cable.
➢ In Cable mode, select the correct analog signal cable system source among
STD, HRC, and IRC by pressing the ▲ or ▼ button, then press the ENTER
button. If you have Digital cable, select the cable system signal source for
both Analog and Digital. Contact your local cable company to identify the
type of cable system that exists in your particular area.
To memorize the channels, press the ► button to select Start, then press
the ENTER button.
Contact your local cable company to identify the type of cable system that
exists in your particular area.
BN68-01094N-Eng.indb 15
Continued...
English - 15
i
Menu language, Shop Mode,
Channels and Time will be set.
Start
Plug & Play
Select the language of the OSD.
Menu Language :
English
Español
Français
Português
Move Enter Skip
Plug & Play
Select Home Mode when installing this TV at home.
Shop Home
Move Enter Skip
Plug & Play
Select the antennas to memorize.
Start
Air
Start
Cable
Air + Cable Start
Enter Skip
Move
2007-04-27 ¿ÀÈÄ 3:06:52