Using The Photo (Jpeg) List - Samsung PL-63P71FD Manual Del Usuario

Pantalla de plasma
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using the Photo (JPEG) List

You can play back the JPEG files saved on a memory device in various ways.
1
After switching the mode to WISELINK, select the memory device that you have
inserted. (Refer to page 56)
2
Press the ◄ or ► button to select Photo, then press the ENTER button.
JPEG files and existing folders are displayed.
3
Press the ▲/▼/◄/► buttons to select a file, then press the ENTER button.
Pressing the button over a photo icon displays the currently selected photo
in full screen. However, JPEG files smaller than 640x480 pixels are zoomed-
in at 4 times their original size. (e.g. If a photo's original size is 200x200
pixels, it is displayed at 800x800 pixels.)
Press the INFO button and select View to view a photo image at its original
size.
Pressing the button over a folder icon shows the JPEG files included in the
folder.
While a full screen is displayed, ◄ or ► buttons will let you see another
photo image in the same folder.
Press the PLAY/PAUSE button when a Photo icon is selected to start a Slide
Show.
To exit WISELINK mode, press the WISELINK button on the remote control.
Moving to a photo may take a few seconds because the file needs to be
loaded. At this point, the icon will appear.
This menu shows only the files whose extension is jpeg (or jpg).
Files with other formats such as gif or tiff will not be displayed.
Fifteen thumbnail photos are displayed per page.
The thumbnails are numbered from left to right and from top to bottom, from
1 to 15.
Folders are displayed first and they are followed by all JPEG files in the
current folder. The folders and JPEG files are sorted in alphabetical order.
If the photo is displayed in full screen, you can zoom in and out or rotate the
photo on the screen. (Refer to pages 61~62)
It takes a while to show JPEG files as thumbnail images.
WISELINK for this product supports JPEG files up to 8K x 8K pixels. For
progressive JPEG files or files whose size exceeds 8MB, the photo will be
displayed as a thumbnail only. When trying to view a progressive JPEG file,
the message Not supported mode will appear. When trying to view a file
exceeding 8MB, the message This file is too large to decode will appear.
The higher the image resolution advances, the longer the display time takes.
You cannot decode images beyond a horizontal resolution of 5000.
You cannot decode images beyond a vertical resolution of 4000.
Press the WISELINK button on the remote control to turn on the WISELINK mode.
BN68-01094N-Eng.indb 57
English - 57
2007-04-27 ¿ÀÈÄ 3:08:41

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido