2-Wire System With Touch Push-Buttons; Description; Recommendations For Cleaning The Entrance Panel; Operation - Alcad USOA MVG-000 Manual De Instalador

Placa modular
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

VIDEOPORTERO 2 HILOS | 2-WIRE VIDEO DOOR ENTRY SYSTEMS | VIDÉO-PORTIER 2 FILS

2-WIRE SYSTEM WITH TOUCH PUSH-BUTTONS

DESCRIPTION

System which makes it possible to perform small-medium size installations in:
• Buildings with one or several points of entry.
- Buildings of up to 96 dwellings (monitors/telephones).
- Up to 6 access or entry points.
• Compounds containing several inner buildings.
- Compounds of up to 16 inner buildings (with entrance panel with pushbuttons).
- Up to 6 entry points or external access points (gatehouses) to the compound.
- Up to 6 access or entry points per building.
- Maximum number of houses in the compound: 96.
• Up to 6 devices (monitors/telephones) per dwelling.
• 2-wire connection, without connection polarity, both between panels and to the devices
(monitors/telephones) in the dwellings.
• All the monitors/telephones of each building are programmed from the main entrance panel
of the building.
• Confidentiality feature.
• Automatic switch-on feature with main panel (from telephone) or looped (from monitor).
• Electronic call. Call tone in dwelling varies depending on where the call is coming from
(entrance panel of the building: main panel, secondary; external entry point to the compound).

RECOMMENDATIONS FOR CLEANING THE ENTRANCE PANEL

Do not use aggressive products that may leave traces or damage the different materials of
this entrance panel. Use only a soft, water-moistened microfiber cloth.
The cleaning mode blocks calls for 30 seconds, allowing you to clean the surface or
manipulate the panel during that time without the risk of making random calls. To activate the
cleaning mode, press and hold 2 buttons on the same button module until the red light of the
"system busy" icon

OPERATION

There are two operating states: system on standby and system active.
1.- SYSTEM ON STANDBY
By default, the telephones/monitors are inactive, so that the functions of communicating with
the entrance panel and opening the door are disabled (on telephones/monitors with a handset,
picking up the receiver you will hear a continuous tone). The entrance panels are on standby,
with the audio system disabled while waiting for a call to be made or for a telephones/
monitors to activate the automatic switch-on system.
42
lights up.

Publicidad

Tabla de contenido
loading

Tabla de contenido