VIDEOPORTERO 2 HILOS | 2-WIRE VIDEO DOOR ENTRY SYSTEMS | VIDÉO-PORTIER 2 FILS
INSTALLATION PARAMETERS CONFIGURATION INSTRUCTIONS
TYPE OF ENTRANCE PANEL, EXTERNAL, MAIN OR SECONDARY - CONTROL SW1
Configure each entrance panel using the SW1 control on the back of the main module:
• Assign a different identification number to each building, beginning with number 1. In the
case of several interior entrances, assign a different number to each of the interior panels
of the rest of the entrances, beginning with number 1 (Interior entrances - Secondary
panels).
• Configure the exterior entrace panel as the main one. In the case of several exterior
entrances, assign a different number to each of the exterior panels of the rest of the
entrances, beginning with number 1 (Exterior entrance - Secondary panels).
64
SW1
EVG-XXX
EAG-XXX
ENTRANCE PANELS
CONFIGURATION
SW1