Worx Professional WU430 Manual Del Usuario página 6

Accessories
Use cutting blade with the following specification:
190mmX24TCT diameter, 30mm bore
•
Spanner
•
• Parallel guide
Vacuum adapter
•
We recommend that you purchase your accessories from the same
store that sold you the tool. Use good quality accessories marked
with a well-known brand name. Choose the type according to the
work you intend to undertake. Refer to the accessory packaging for
further details. Store personnel can assist you and offer advice.
All manuals and user guides at all-guides.com
1
1
2
1
3
1
1
4
5
6
7
8
9
10
11
12
13
14
15
6
Additional safety rules for your
circular saw
Always wear a dust mask, hearing protection and eye protection.
Only use saw blades recommended in the specification.
Always wear gloves when handling saw blades and rough material.
Saw blades shall be carried in a holder whenever practicable.
Fully unwind cable drum extension to avoid potential overheating.
When an extension cable is required you must ensure it has the
correct ampere rating for your power tool and is in a safe electrical
condition.
Ensure your mains supply voltage is the same as indicated on the
rating plate.
Your circular saw is a hand held tool, do not clamp your circular
saw.
Before cutting, check the cutting line is free of nails, screws, etc.
Do not cut small workpieces with a circular saw. If possible, use a
jigsaw.
Only make cuts with the blade direction downwards, never
upwards or at the side.
Do not use a blade unless the rated blade speed exceeds the saw
no load speed.
Never remove the guard system. Never use the saw if the guard
system does not
function correctly. Never lock the moving guard open. The guard
must move freely.
Never use saw blades made from high speed steel(HSS).
Always check walls, floors and ceilings to avoid hidden power
cable and pipes.
After long working periods external metal parts and accessories