DAINESE D-AIR STREET SMART CHEST.1 Nota Informativa De Instrucción página 60

GB

Before mounting your motorcycle, check system status by using the user interface. The System must find its GPS signal and be
ready as shown by the flashing blue LED (see user interface chapter). One single blue LED flashing cycle confirms the reception of
the signal.
Figure 4: example of flashing sequence indicating that the System is ready for use

After you have finished using the System, deactivate the D-AIR STREET SMART CHEST immediately by opening the switch-
on/switch-off button. During transport, connect the safety button cover provided with the System.
●●● IMPORTANT: when the System is not in use, always make sure that the button do not close the contact. Use the safety button
cover provided standard. In the event of unintended contact causing switch-on, the system could be triggered accidentally during
transport.
P. 58
Figure 5: safety button cover
D-Air Intelligent Protection System
®