Selecting The Operating Mode - Waeco CoolAir SP-900 Instrucciones De Uso

BA_SP-900.book Seite 28 Montag, 14. April 2008 9:48 09
Using the air conditioner
8.4

Selecting the operating mode

You can choose between four operating modes and the timer function:
➤ Press the operating mode button + or - on the control panel (2 8/7,
page 3) or on the remote control (3 5/4, page 4) to select the mode.
✓ The first position of the digital display (2 9, page 3) shows the
selected mode.
Operating Display
mode message
1
2
3
Automatic
Timer
function
8.5 Switching off the air conditioner
➤ With the system switched on, press the ON/OFF button (2 1, page 3).
✓ The LEDs and digital display go out.
✓ The fan and the compressor switch off.
28
All manuals and user guides at all-guides.com
Explanation
Lowest output level – the fans run at the
lowest level.
Medium output level – the fan runs at the
medium level.
Highest output level – the fan runs at the
highest level.
The system automatically selects the
A
optimum fan speed to reach the set tempera-
ture most efficiently.
Pre-selection of running time from 10 to
000
120 minutes. Alternating display for operating
mode and remaining running time.
CoolAir SP-900